6650 - Nexus : Can we monitor the voltage of Block Ram with Nexus ADC?

• Related Articles

• Nexus ADC: At which clock edge are SOC, COG, EOC, and data output captured?

  The SOC, EOC, COG signals are acquired on falling edges. The output data should be sampled on the adc_clk rising edge once EOC is high.

• 6429 - All Nexus / ADC: What does the 1.2V internal reference generator is used for ADC reference voltage?

  Description: This article explains the purpose of internal reference generator in ADC for all Nexus products. Solution: The 1.2V internal reference generator is provided to facilitate wafer level and package functional testing. With an accuracy of ...

• 6093 - [Nexus Device] ADC: What is the minimum and maximum values for the VCC_ADC?

  VCC_ADC which is 1.0V follows the same voltage minimum and maximum range of VCC.

• 6510 - CrossLink-NX: What is the accuracy of ADC Internal Reference Voltage?

  Description: The accuracy of the ADC Internal Reference Voltage (VREFINT_ADC) value is +/-5%.

• 7154 - PMI RAM for Nexus FPGAs: Why is Radiant implementing Large RAM block when using "pmi_ram_dq" and "pmi_family" settings in the design, instead of the EBR block as expected?

  If the design requires memory initialization, "pmi_family" parameter should be set to "common". This parameter setting would allow Radiant to build the EBR. For more details, you can refer to Memory Modules User Guide, Chapter 5 (Initializing Memory) ...