Definition: TransFR (Transparent Field Reconfiguration) is a technology that helps minimize system interruption. This is supported through JTAG and Non-JTAG port (example Wishbone). However, there are some disadvantages of Non-JTAG TransFR. It does ...
If the Hitless I/O is pulled up to a user defined value when the IO is set to open-drain, the TransFR option will not hold the user defined IO value. This is a limitation of the Hitless IO feature since the user modified the IO setting to be open ...
Lattice currently recommends the following for implementing Gigabit Ethernet interfaces: CertusPro-NX FPGAs: Use SERDES-based SGMII or RGMII Certus-NX, MachXO5-NX, and CrossLink-NX: Use RGMII These recommendations are based on updated LVDS-based ...
Lattice Technical Support Expectation Please be advised that highest priority for Lattice Technical Support will be given to 1. Software which is not working as expected or suspected bugs. We recommend that customers use the latest software tools and ...
Glitch Fliter is used to prevent short-duration events of glitches, This is used to prevent False tripping on noise in a system. GLITCHFilter in device constraints , enables 1ns glitch filtering.
Description: In simulating designs for Lattice devices, this error may appear if there is no GSR instantiated in the testbench. Solution: There is no planned fix for this simulation issue. To work around this, please instantiate GSR on your ...
Solution: The following RDs available for Crosslink-NX will support the said applications: 1. FPGA-RD-02212 : N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation - Aggregate multiple Image Sensors into a single Output with Minimal Latency. - Uses ...