Description:This article explains the reason ADC clock-in cannot be driven using an oscillator output in CertusPro-NX. Solution:In CertusPro-NX., the ADC clock input is hard-wired on the fabric to the 4th secondary output (CLKOS4) of the Lower Right ...
Description: This article explains the purpose of internal reference generator in ADC for all Nexus products. Solution: The 1.2V internal reference generator is provided to facilitate wafer level and package functional testing. With an accuracy of ...
Lattice currently recommends the following for implementing Gigabit Ethernet interfaces: CertusPro-NX FPGAs: Use SERDES-based SGMII or RGMII Certus-NX, MachXO5-NX, and CrossLink-NX: Use RGMII These recommendations are based on updated LVDS-based ...
Lattice Technical Support Expectation Please be advised that highest priority for Lattice Technical Support will be given to 1. Software which is not working as expected or suspected bugs. We recommend that customers use the latest software tools and ...
Glitch Fliter is used to prevent short-duration events of glitches, This is used to prevent False tripping on noise in a system. GLITCHFilter in device constraints , enables 1ns glitch filtering.
Description: In simulating designs for Lattice devices, this error may appear if there is no GSR instantiated in the testbench. Solution: There is no planned fix for this simulation issue. To work around this, please instantiate GSR on your ...
Solution: The following RDs available for Crosslink-NX will support the said applications: 1. FPGA-RD-02212 : N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation - Aggregate multiple Image Sensors into a single Output with Minimal Latency. - Uses ...