Radiant version 2023.1 or newer: Are there priority rules when multiple timing exception constraints are applied on a specific timing path?

Kindly refer below to the exception priority:

1. set_false_path

2. set_max_delay or set_min_delay

3. set_multicycle_path

A couple of notes:

1. set_max_skew applies to the timing path together with exception constraint that takes priority.

2. set_clock_groups although not considered a timing exception takes the higher priority than the timing exceptions.

Related Articles
<div>Lattice Radiant version 2022.1 and 2023.1: Why does the Radiant Timing Report indicate an unconstrained path for path with applied constraint such as <i>set_input_delay</i>?<br></div>
Description: When a user defines a set_input_delay on a port, the timing report will indicate that the port/paths related to the port are unconstrained. Solution: This is a known issue. This is scheduled to be fixed on Fix in Radiant 2023.2.
129 - Lattice Diamond: How can I single out a specific path or transfer in the timing analysis TRACE report?
TRACE lists the paths per timing preference starting from the worst case path going down. Let's say you want to look at a path that maybe the 1001st worst case path in the design. You do not want to list 1001 paths in the trace report. How can this ...
Lattice Radiant: What are the Timing constraints for PMI_FIFO_DC using EBR IMPLIMENTATION?
Here are the constraints to be used: set_max_delay -from [get_pins -hierarchical */*wp_sync1_r*.ff_inst/Q] -to [get_pins -hierarchical */*wp_sync2_r*.ff_inst/DF] 2 set_max_delay -from [get_pins -hierarchical */*rp_sync1_r*.ff_inst/Q] -to [get_pins ...
All Nexus / Radiant: Why can't users see reset signals on the timing analysis reports even without setting the set_false_path constraints?
Resets are not timed or cannot be checked on the timing analysis reports if they are using Global/Set Reset (GSR) component. GSR will be used if the following are set: 1. GSR is instantiated on the RTL and set to the reset signal. 2. GSR-related ...
Radiant: How are multiple lines of constraints handled in the device constraint editor?
Description: When handling multiple constraint commands in a constraint files, there might be confusion in which settings are applied. This FAQ will give examples on how device constraint editor handles it. See examples below for ldc_set_sysconfig ...

Radiant version 2023.1 or newer: Are there priority rules when multiple timing exception constraints are applied on a specific timing path?

Radiant version 2023.1 or newer: Are there priority rules when multiple timing exception constraints are applied on a specific timing path?

Related Articles

<div>Lattice Radiant version 2022.1 and 2023.1: Why does the Radiant Timing Report indicate an unconstrained path for path with applied constraint such as <i>set_input_delay</i>?<br></div>

129 - Lattice Diamond: How can I single out a specific path or transfer in the timing analysis TRACE report?

Lattice Radiant: What are the Timing constraints for PMI_FIFO_DC using EBR IMPLIMENTATION?

All Nexus / Radiant: Why can't users see reset signals on the timing analysis reports even without setting the set_false_path constraints?

Radiant: How are multiple lines of constraints handled in the device constraint editor?