You can find the mechanical package drawing in our Packaging Diagrams datasheet: https://www.latticesemi.com/view_document?document_id=213 The package view with the pins in your design from the Lattice Diamond Project Navigator's main menu choose: ...
Lattice Technical Support Expectation Please be advised that highest priority for Lattice Technical Support will be given to 1. Software which is not working as expected or suspected bugs. We recommend that customers use the latest software tools and ...
Lattice currently recommends the following for implementing Gigabit Ethernet interfaces: CertusPro-NX FPGAs: Use SERDES-based SGMII or RGMII Certus-NX, MachXO5-NX, and CrossLink-NX: Use RGMII These recommendations are based on updated LVDS-based ...
Glitch Fliter is used to prevent short-duration events of glitches, This is used to prevent False tripping on noise in a system. GLITCHFilter in device constraints , enables 1ns glitch filtering.
Description: In simulating designs for Lattice devices, this error may appear if there is no GSR instantiated in the testbench. Solution: There is no planned fix for this simulation issue. To work around this, please instantiate GSR on your ...
Description: Nexus device family has a default I2C slave address of 0x40 and you are allow to modify it based on your requirement. Solution: To permanently modify the I2C address, you can modify the desired value in .fea file and use the Programmer ...