Radiant: Does Radiant perform static timing analysis (STA) on reset pins/signals?

Radiant performs static timing analysis (STA) on reset pin/signals that are using Local Set/Reset (LSR).

To use LSR, user need to make sure that the GSR-related strategy settings are False/OFF (Force GSR on Synthesis and Infer GSR on MAP). User also need to make sure that they don't have any GSR attributes that assigns GSR to a net/signal or enables GSR on a module.

Related Articles
All Nexus / Radiant: Why can't users see reset signals on the timing analysis reports even without setting the set_false_path constraints?
Resets are not timed or cannot be checked on the timing analysis reports if they are using Global/Set Reset (GSR) component. GSR will be used if the following are set: 1. GSR is instantiated on the RTL and set to the reset signal. 2. GSR-related ...
<div>Radiant: How can user perform Timing Analysis using a different speed grade other than the speed grade of the selected device (or the PAR speed grade)?</div>
To perform Timing Analysis on different speed grades independent of the PAR speed grade, user can change the Timing Analysis speed grade in 3 ways: 1. Change the strategy setting for PAR Timing Analysis speed grades to a different speed grade than ...
Radiant: Why is the result of my timing different on the PAR report compared with the TWR report?
The result from .PAR and from .TWR is expected to be different. For Radiant 2023.2, multi-corner timing analysis is implemented, the idea is for: A. 2023.2 1) PAR Timing Analysis (.PAR) - The Timing model used is the model with "WORST" case at ...
4529 - Diamond 3.5: Does recovery and removal timing analysis is performed on Flip-Flop when <strong>Infer GSR </strong>(Global Set/Reset) option is set to True in Strategy setting?
Solution: No, it does not. Recovery and removal timing analysis is performed in design if GSR-True in design. Timing analysis is not applied to any signal attached to the GSRN net on the devices. So if the reset on the device is routed via the GSRN ...
7650 - Radiant 2023.2 SP1 to Radiant 2024.1 SP1 Reveal Analyzer: signal appears to hang or reset
Description: When opening Reveal Analyzer, signals will appear to reset or hang. The Reveal version in Radiant being used includes the following: 2023.2 SP1, 2024.1, 2024.1 SP1. Solution: This is a known issue and is planned to be fully fixed in ...

Radiant: Does Radiant perform static timing analysis (STA) on reset pins/signals?

Radiant: Does Radiant perform static timing analysis (STA) on reset pins/signals?

Related Articles

All Nexus / Radiant: Why can't users see reset signals on the timing analysis reports even without setting the set_false_path constraints?

<div>Radiant: How can user perform Timing Analysis using a different speed grade other than the speed grade of the selected device (or the PAR speed grade)?</div>

Radiant: Why is the result of my timing different on the PAR report compared with the TWR report?

4529 - Diamond 3.5: Does recovery and removal timing analysis is performed on Flip-Flop when <strong>Infer GSR </strong>(Global Set/Reset)&nbsp;option is set to True in Strategy&nbsp;setting?

7650 - Radiant 2023.2 SP1 to Radiant 2024.1 SP1 Reveal Analyzer: signal appears to hang or reset

4529 - Diamond 3.5: Does recovery and removal timing analysis is performed on Flip-Flop when <strong>Infer GSR </strong>(Global Set/Reset) option is set to True in Strategy setting?