7006 - Radiant 2023.1 and above: How to get an IP on the IP Server on a PC without an internet connection?

In a PC with internet access, please install the latest Radiant version. By using the latest version of Radiant, user can download and save any IP on the IP Server locally then manually transfer it to the other machine without internet and install the IP. 

Here are the steps:

1. On user's PC with Radiant and Internet: Open Radiant then open a design

2. Go to IP Catalog > IP Server and click on the IP that the user wants to download and save.

3. Click the Download and save icon to get a copy of the IP locally in *.ipk format.

Note: Do not change the name of the file as it could cause unusual errors.

4. Once the *.ipk file has been downloaded, user can then transfer the file through external storage to the Machine with no internet.
5. To install the IP on Radiant, click the Install icon and locate the *.ipk file:



6. Once installed, the user should be able to see the IP on the "IP" dropdown.
If the IP does not appear, try clicking the refresh button.

• Related Articles

• 7237 - Radiant 3.2: Can the user download the IPK file of the IP in the IP catalog?

  Description: Radiant currently provides no mechanism for the user to download an IPK file. This makes it very difficult for users with no internet access on some parts of their network to obtain IPKs or move IPKs between machines. The only solution ...

• 7087 - Radiant Programmer: Does this support remote programming capability?

  Radiant Programmer itself does not have the capability of doing remote programming, it will need a third-party connection to allow remote programming. User can use their server as long as they have the 3rd party hardware component (hub) and software ...

• 7777 - Radiant / Third-Party Simulation Tools: General Guidance on Library Compilation Methods and IP Generation

  Description: This FAQ complements Application Note FPGA-AN-02084 by offering practical guidance for using Synopsys VCS and Cadence Xcelium in Lattice FPGA simulations. It expands on the original note with real-world examples involving Lattice IPs and ...

• 6603 - Radiant: How to perform IP re-generation using ipgen?

  First, run "ipgen.exe -h" from the tcl console to view all the command options as shown below. usage: ipgen.exe [-h] [-o OUTPUT_DIR] [-proj_dir PROJ_DIR] -ip IP_MODULE_DIR [-cfg IP_CONFIG_FILE] [-skip_uniquify SKIP_UNIQUIFY_HDL] [-cfg_value ...

• 7775 - Radiant / Third-Party Simulation Tools: How to simulate a PLL IP thru cmpl_libs in Synopsys VCS or Cadence Xcelium?

  Description: This example demonstrates the recommended procedure for simulating a phase-locked loop (PLL) IP, specifically a foundation IP, on the Avant-G70 device using the cmpl_libs method within Synopsys VCS or Cadence Xcelium. The cmpl_libs ...