7787 - Path length and design filename are not allow to exceed 260 characters

• Related Articles

• 3175 - Lattice Diamond: What is the maximum allowable project path length in Lattice Diamond to prevent Synthesis Failure?

  The maximum project length allowed in Lattice Diamond is same as the maximum allowable path length in Windows operating system which is of 260 characters. Below are the steps to calculate the project path length in diamond. Maximum allowable path ...

• 7361 - Radiant: Why does Radiant generate bitstream that contains unusual or garbled characters?

  Description: When generating a bitstream on Radiant, there have been reports where the generated bitstream includes unusual or garbled characters that are not appropriate for device programming. Solution: This issue might occur if the project path is ...

• 6513 - Lattice Diamond: How do i set multiple verilog include directories on my design?

  You can add multiple directories in the "Verilog Include Search Path" in Design implementation, you can define them as (Example): C:/Users/cmeala/Desktop/CASES/Include Case/Path1;C:/Users/cmeala/Desktop/CASES/Include Case/Path2 then try using ...

• 1046 - Lattice Diamond: What is the "BLOCK INTERCLOCKDOMAIN PATH" preference used for?

  Lattice Diamond: This constraint is used to block paths that involve data transfer between registers that are clocked by different clock nets. If used without understanding, it will block all clocks domains from each other, even if they are supposed ...

• 129 - Lattice Diamond: How can I single out a specific path or transfer in the timing analysis TRACE report?

  TRACE lists the paths per timing preference starting from the worst case path going down. Let's say you want to look at a path that maybe the 1001st worst case path in the design. You do not want to list 1001 paths in the trace report. How can this ...