TCP/IP Enablement Guide for CPNX GSRD v3.0
This Knowledge Article provides a quick, reader‑friendly overview of the Golden System Reference Design (GSRD) v3.0 TCP/IP Enablement Guide for CertusPro‑NX.
The full guide walks through how to enable, modify, and run the built‑in TCP/IP capabilities on the RISC‑V/FreeRTOS platform - covering both the lightweight Raw API echo server (Port 7) and the BSD‑socket‑style TCP server (Port 5000).
Please refer to this download link for the User Guide and Design Files:
Related Articles
1295 - Lattice Mico System: Does Lattice provide TCP/IP network stack support for the TSMAC and MICO32?
Lattice Mico System: A TCP/IP network stack is not directly included with the TriSpeed MAC IP or Mico32 software. A software-based TCP/IP network stack called lwIP has been used in some Mico32 reference designs. lwIP is a light-weight implementation ...6898 - CertusPro-NX / Propel version 2022.1: Will there be an available GPIO IP with an AXI interface similar to what is observed on the CPNX FreeRTOS template design?
The GPIO with AXI interface on the CPNX FreeRTOS Template design is created initially for the template to test the AXI4 interconnect but it is not part of the available IPs. When a FreeRTOS template for AVANT devices, the user can see that the ...7326 - Propel: Why does the RISC-V debug session hang during exception handling?
Description: RISC V CPU instruction/data manager consists of exception handling routine in the BSP source: ..\src\bsp\driver\riscv_mc\interrupt.c The API is a standard RISC V practice where it prints out the failure based on the mcause register when ...7214 - Avant-E: How to enable RISC-V software debug for Avant-E device
Description: User is required to implement soft JTAG to enable RISC-V debug in Avant-E early silicon. Solution: Please follow below step to enable debug with Soft-JTAG. The pin assignment is based on Avant-E Evaluation Board. Create an Avant-E RISC-V ...7212 - Propel: How can I perform IP generation or IP re-generation through Tcl command?
Description: The user can use Propel-based Tcl command for IP generation in exchange of the IPGEN tool (since this is for Radiant IP only). Solution: (A) For Propel 2023.1 or older version, the Tcl command "sbp_design config_ip" can be use. Here is ...