Lattice Radiant and Diamond: How do i resolve core0 error when Running reveal analyzer? How to resolve Error "Core0 incorrect pattern readout" while running Reveal Analyzer?

• Related Articles

• Reveal Analyzer on iCE40 Ultraplus Breakout Board: What is the common cause of core0 incorrect pattern readout?

  One common cause for this issue for iCE40 Ultraplus Breakout boards is failing to use the HW-USBN-2B cable as shown on page 43 of the tutorial. Here's a direct link to the document: http://www.latticesemi.com/view_document?document_id=52758 Unlike ...

• 2295 - Reveal:  How can I resolve the Reveal error: core0 incorrect signature (RVL: 154782948 != Device: 0)

  A signature mismatch with a reported signature of 0 almost always means the sample clock is not correct. The typical reasons are it’s too slow, or not a free running clock. Usually, the frequency of the sample clock should meet its timing constraint ...

• 7469 - Lattice Reveal: What should be checked if a Reveal Error <i>Core0 incorrect pattern readout</i> is encountered?

  First, try to adjust the TCK Low pulse width delay to a certain value (usually between 5 and 10). This can be done in the �Design > Cable Connection Manager� settings. If above suggestion does not solve the error, verify the following items: (1) ...

• 2795 - Diamond: How do I create a new Reveal Analyzer file without deleting&nbsp;an existing .rva file in my Lattice Diamond project directory?

  Reveal Analyzer Wizard launched by clicking on Reveal Analyzer button creates a new .rva file only if there is no .rva file in your Lattice Diamond project directory. You cannot create a new Reveal Analyzer file with Reveal Analyzer Wizard with ...

• 380 - ispLEVER Classic/Diamond Reveal Analyzer: using a JTAG chain with multiple devices

  Reveal Logic Analyzer can be used for On-Chip Debug even if the targeted device is a JTAG chain with multiple devices. Use ispVM to define the JTAG chain and the position of the targeted device in the chain. Then, save the chain (.xcf) file and ...