Lattice Diamond: How do we tell the software to reduce the DSP block utilization and use LUTs instead?

• Related Articles

• Lattice Diamond: How to save Diamond Project File (.ldf) without exiting Diamond Software?

  You can use "prj_project save" command in Diamond TCL console. This will let you save the Diamond Project file without exiting the Diamond Software.

• 1046 - Lattice Diamond: What is the "BLOCK INTERCLOCKDOMAIN PATH" preference used for? <br>

  Lattice Diamond: This constraint is used to block paths that involve data transfer between registers that are clocked by different clock nets. If used without understanding, it will block all clocks domains from each other, even if they are supposed ...

• Lattice Diamond: How will I show IPs installed from Lattice IP Server in Clarity designer in Diamond Software?

  If this would be related to the IP not appearing in the local catalog, you might try to use this approach: (1) from C:\LatticeCore which is the IP repositories (if this is default), locate the IP that you have, copy the folder name (2) from ...

• 735 - Lattice Diamond: Synthesis: Synplify Pro: How can I make Synplify Pro infer registers instead of RAM?

  Lattice Diamond: Synthesis: Synplify Pro: There might be situations where you have written Verilog or VHDL code which infers a memory. However the design tools are implementing this as distributed RAM, which can't be initialized or preset to zero. ...

• 3837 - Lattice Diamond: Is the USE EDGE preference available in the tool for MachXO2 devices?<br>

  Solution: The USE EDGE preference is not available for MachXO2 devices in Lattice Diamond software. The only way to support the edge is through the design - ECLKSYNC and DDR modules only.