DisplayPort IP symbol Transfer Unit (TU) size is capped at 63

• Related Articles

• DisplayPort RX IP does not support backpressure

  Description: DisplayPort RX IP does not support backpressure. The IP continues to output data even when the downstream tready signal is deasserted. Resolution: A shallow buffer will be introduced in a future IP release to handle occasional tready ...

• DisplayPort TX IP link training sequence not compliant with the DisplayPort Specification

  Description: The DisplayPort IP link training sequence is a subset of the DisplayPort Specification and does not yet support voltage and pre-emphasis adjustment requests, link rate down-training, or lane count down-training. Resolution: This will be ...

• DisplayPort IP resolutions must be divisible by 4

  Description: The DisplayPort IP may not be able to handle custom resolutions that are not divisible by 4 (i.e., 1366x768). This applies to both the RX and TX of DisplayPort IP. Resolution: This will be fixed in the next DisplayPort IP release.

• DisplayPort IP RX 8.1G Unable to Achieve Interlane Alignment

  Description: DisplayPort IP(RX) operating at 8.1 Gbps may encounter an issue where the DisplayPort IP is unable to achieve interlane alignment during link training. This is due to some hardware have lane data arrives earlier than expected, resulting ...

• DisplayPort TX IP unable to handle I2C_DEFER and I2C_NACK

  Description: The DisplayPort IP is not able to respond to I2C_DEFER and I2C_NACK correctly. Resolution: This will be fixed in the next DisplayPort IP release.