Diamond version 3.13 Reveal Analyzer fails when using a HW-USBN-2A cable on a machine with an Intel CPU: ERROR - failed to set cable port (cable:USB port:EzUSB-0 error:-1).

• Related Articles

• Diamond 3.12 version SP1 and older: Synthesis fails when Synplify Pro is used on Intel 11th gen and above processors

  Description: In Diamond version 3.12 and older, Synthesis may fail when using Synplify Pro if the system uses an Intel 11th Gen and above processor. Solution: The failure occurs when either of the following conditions is met: 1. Encrypted Source is ...

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 380 - ispLEVER Classic/Diamond Reveal Analyzer: using a JTAG chain with multiple devices

  Reveal Logic Analyzer can be used for On-Chip Debug even if the targeted device is a JTAG chain with multiple devices. Use ispVM to define the JTAG chain and the position of the targeted device in the chain. Then, save the chain (.xcf) file and ...

• Reveal Analyzer core0 error: How to check the JTAG cable connections?

  When the user connects the 2B programming cable with color-coded flywires to the board, Reveal only uses 4 wires + VCC and GND: * white = TCK * purple = TMS * orange = TDI * brown = TDO * red = VCC * black = GND If the user has connected a yellow ...

• Diamond 3.12 SP1 and below Programmer: ERROR: boolUSBISPReadPacket()

  Description: When programming a device for the second time via terminal or scripting using HW-USBN-2A in Linux, below error will occur: ERROR: boolUSBISPReadPacket() Solution: This is a known issue on Diamond 3.12 SP1 or lower versions. As a ...