Diamond: How to insert/use the IO register to improve timing?

• Related Articles

• 941 - Diamond: Timing: Why does the hold analysis use a different speed grade?

  Diamond: Timing: When running a Hold analysis the default speed grade run is the -M. The -M speed grade is the fastest device across a process and is usually the worst case for a hold analysis. Ideally when looking at a hold analysis the IO Timing ...

• 198 - Diamond: How do users improve the performance of FPGA designs that use Embedded Block RAM (EBR)?

  Many times FPGA designs that contain Embedded Block RAM (EBR) do not meet system performance requirements. Here are some suggestions for improving the performance of designs using EBR. There may be a large amount of logic surrounding the EBR. Inspect ...

• 931 - Diamond: Timing: How do I define the skew of a registered bus to IOs?

  Diamond: Timing: The preference to use is CLOCK_TO_OUT with the Max and Min options. Max is used by the setup analysis Min is used by the Hold analysis. For example: CLOCK_TO_OUT "dout_*" MAX 4 ns MIN 3 ns CLKNET "clk_2x" ; Where the * denotes the ...

• Lattice Radiant: Why does the constraint coverage did not improve after using set_false_path constraint?

  By Default, set_false_paths does not improve constraint coverage, however For Radiant 2023.1 or later, the user can use the Timing Command Line Option "-false_covers" to add in the false paths to the timing coverage. This can be applied on the ...

• Lattice Diamond: What does the [31:0] bits in Control Register 0 mean?

  The Control Register is used to control the device during and after a configuration. [31:30] Core CLK SEL Control bits to set the core clock frequency respect the internal oscillator frequency. 00 Fosc/2 01 Fosc/4 10 Fosc/5 11 Fosc/6 29 WKUP TRAN ...