Diamond Deployment Tool: How to convert .jed file to .bit?

• Related Articles

• Diamond Deployment Tool: Is is possible to convert MCS(Intel Hex) file to Binary file?

  We currently don't have the feature for converting mcs file to binary file. If you have the JEDEC file that is used to convert to an MCS file, you can use the Deployment Tool to convert it to binary hex (.bin)

• 4084 - Diamond Deployment Tool: Does the Lattice Diamond Deployment tool support JEDEC to .bin conversion like the utility JED2HEX.exe ?

  The Lattice Diamond Deployment tool does not support the .bin generation. The Diamond Deployment tool has the feature to convert JED to the Binary bitstream, ASCII Bitstream, intel hex, Motorola hex and other format files. The JED2HEX.exe utility was ...

• 3344 - Diamond Deployment Tool: How to generate the merged .mcs file used for cold and warm boot feature of iCE40?

  To generate the merged .mcs file, use the Deployment tool (Lattice Diamond 2.2 onwards). Follow the process mentioned below: 1. Open the Deployment Tool from Start Menu> All Programs> Lattice Diamond version > Accessories> Deployment Tool. Or Start ...

• 3795 - Diamond Deployment Tool: Does the PCF(Pattern Control Format) format supported in the Lattice Diamond Deployment Tool?

  The Lattice Deployment Tool already support's PCF format. To generate the PCF file, invoke Lattice Diamond Deployment Tool, Select Tester function type and ATE Output File Format. Both the Agilent HP3070 and HP3065 Tester Types are supported for PCF ...

• 952 - Programmer: What is the difference between a .bit file and a .jed file?

  The .jed and .bit files are programming files generated using ispLEVER or Diamond software. The .bit file is used to program volatile devices such as the SRAM of FPGA/CPLDs. The .jed file is used to program non-volatile devices such as the internal ...