7123 - Diamond 3.13 and PCS IP: Why is an "Error - runtime variable "print_trimmed_nets" is not declared" is produced after generating the PCS core?

Description:

When starting Clarity Designer > Double-clicking on 'PCS' under Architecture_Modules > Clicking "Configure" button

The following error will appear:

Error - runtime variable "print_trimmed_nets" is not declared

The issue is due to a bug in Diamond 3.13. Diamond 3.12 and 3.12 SP1 do not have this issue.

Solution:

The workaround would be to generate the PCS core using Diamond 3.12. You may access these on our Software Archive under Downloadable Software.

Using the PCS project generated from 3.12, you can still open it in the newer Diamond 3.13 but do not regenerate the PCS IP in the new version. You can still generate the bitstream and use the old version of the PCS.

If you need to use this on Diamond 3.13, please file a technical support ticket to request a patch.

This PCS error is planned to be fixed in the next Diamond release.

Related Articles
7733 - ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?
In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...
7042 - Lattice Diamond: Why does my design with Lattice Sentry i2c filter core failed compilation with "Synthesis exit by 9" and "Done: error code 9" error message?
Description: Users utilize i2c filter encounter Synthesis Exit by 9 when synthesizing their design on Diamond Solution: This is due to wrong FPGA tool selection on the IP parameter. Make sure you choose the correct software tool in the IP core ...
6163 - Lattice Diamond LSE: When trying to instantiate the gddr_7:1 ip core, why do I get a Multiple Driver Error?
Description: When IP is synthesized, Tool propagates a Warning and Error shown WARNING - Net direction has following drivers : instance Inst_bw_align ERROR - c:/lscc/gddrtest666/gddr_clarity/gddr71/gddr71.v(1284): net direction is constantly driven ...
6120 - Lattice Diamond/DCSC Primtive IP: 2019990 ERROR - Port SEL does not exist. 
Description: When user used the DCSC Verilog instantiation code from TN02200 and run the design flow compilation, user may observed error in Synthesis run as below. 2019990 ERROR - Port SEL does not exist Solution: To workaround this error message, ...
3917 - Diamond : When attempting to download some Intellectual Property (IP) from IP server, IPexpress says IP is not supported in current diamond version. What is the workaround for it?
This is not an error message, just a simple warning. Click OK in the warning message and go ahead and generate the IP core. This message will not have any impact on the behavior of the IP Core in terms of its functionality.

7123 - Diamond 3.13 and PCS IP: Why is an "Error - runtime variable "print_trimmed_nets" is not declared" is produced after generating the PCS core?

7123 - Diamond 3.13 and PCS IP: Why is an "Error - runtime variable "print_trimmed_nets" is not declared" is produced after generating the PCS core?

Related Articles

7733 - ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

7042 - Lattice Diamond: Why does my design with Lattice Sentry i2c filter core failed compilation with "Synthesis exit by 9" and "Done: error code 9" error message?

6163 - Lattice Diamond LSE: When trying to instantiate the gddr_7:1 ip core, why do I get a Multiple Driver Error?

6120 - Lattice Diamond/DCSC Primtive IP: 2019990 ERROR - Port SEL does not exist.&nbsp;

3917 - Diamond : When attempting to download some Intellectual Property (IP) from IP server, IPexpress says IP is not supported in current diamond version. What is the workaround for it?

6120 - Lattice Diamond/DCSC Primtive IP: 2019990 ERROR - Port SEL does not exist.