939 - Lattice Diamond: How can I block clock transfers in the timing analysis tool? <br>

• Related Articles

• 134 - Diamond: How can user block clock domain transfers where there is already synchronizer circuits in place?

  The Lattice Static Timing Analyzer Trace analyzes all clock domain transfers in which it can relate the source and destination clock domains. This may not always be desired. User may utilize their own synchronizer to handle the transfer between the ...

• 692 - Lattice Diamond:&nbsp; Does the Lattice&nbsp;timing analysis tool only analyze 4096 timing paths at maximum?

  The timing analysis tool does analyze all timing paths in your design. For timing closure, the analyzer will address all failing timing paths even if they exceed 4096 paths. It is for MAP and Place & Route TRACE reporting purpose only that up to 4096 ...

• 740 - Lattice ispLEVER: Timing Analysis: What is the I/O Timing Report?

  Lattice ispLEVER: Timing Analysis: The I/O Timing Report (.ior) is a used to report the IO timing analysis of your design. Input Setup and Hold times (Tsu, Th) and Clock-to-Output times (Tco) are reported. The IO Timing Report sweeps across all the ...

• Lattice Diamond: Are the hold window analysis violations observed on the Timing Analysis View valid timing violations? Do users need to make sure that these are passing even though they are not blocking bitstream generation?

  Even though PAR timing did not show any timing violations, users/designers must check the Timing Analysis View for hold window violations. Hold Window analysis is only for boundary paths, i.e. paths involving input or output ports specified with an ...

• 1587 - Diamond: What are the different factors that affect device speed, temperature and voltage selection during software timing analysis?

  Software uses different temperatures and voltages for timing analysis based on the following factors: Commercial vs. Industrial Part selection.: Commercial part selection enforces the following DEFAULT temperatures for Setup and Hold analysis (based ...