830 - PAC-Designer: What is the best way to get started on using Lattice PAC-Designer Mixed Signal Software?

• Related Articles

• 1467 - PAC-Designer: How can I set up the simulation time in PAC Designer ?

  PAC-Designer: To simulate a design with Lattice Logic Simulator, the design must first be entered or edited using both the schematic windows and the LogiBuilder Sequence Editor. Next, a stimulus file should be created or edited using the Waveform ...

• 1850 - PAC Designer: Does the PAC-Designer I2C utility work with the Lattice USB Download cable?

  The PAC-Designer I2C utility for the POWR1220AT8 device will work with the Lattice USB Download cable when using the WindowsXP operating system. It will not work with Windows7 operating system at this time. This utility was created so that a user ...

• 2865 - PAC Designer: How to implement a latched output for the Power Manager Device?

  In the PAC-Designer Software, users can use D Flip-Flop to implement a clocked latch. In the Logibuilder section of the PAC-Designer software, declare a registered D Flip-flop output using Supervisory Equations. The registered output can be assigned ...

• 1445 - PAC-Designer: Is there a I2C hardware verification utility available in the tool?

  Solution: Yes, there is. I2C hardware verification utilities are available and can be accessed via Tools ->Design Utilities in the PAC Designer. A parallel port programming/download cable can be used to test the features available with most Lattice ...

• PAC Designer: What is the Export classification information for PAC Designer 6.32 Software?

  Please be informed that when it comes to our software products, it doesn’t have any HTS classification. These items are not a tangible items that can be shipped and the HTS is for customs purposes only. Schedule B Code: NA ECCN_US: EAR99 ECCN_SG: NA ...