7641 - Lattice Avant PCIe: Map ERROR 52351076 - Instance 'u_PCIE_IP/lscc_pcie_x8_inst/secured_instance_5_1/secured_instance_4_4/secured_instance_3_0'(MPPCIEX8A_MODE) - PROTOCOL=PCIE_GEN1 cannot be supported in current device.

• Related Articles

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 7496 - Radiant: ERROR <1081326> - Bitstream cannot be generated, either because this device does not support IP Evaluation Mode or the Bitstream Strategy Setting for IP Evaluation Mode is set to False

  Description: When generating a bitstream in Radiant, the error below might occur: ERROR <1081326> - Bitstream cannot be generated, either because this device does not support IP Evaluation Mode or the Bitstream Strategy Setting for IP Evaluation Mode ...

• Lattice Diamond: Does Lattice recommend porting/converting of IP from different device with different IP version?

  Lattice does not recommend users to do porting/conversion of IP from/to different device in different IP versions. Example: FFT Compiler v2.8 does not support ECP5 device. FFT Compiler v2.9 supports ECP5 device. If user used FFT Compiler v2.8 and ...

• Lattice Diamond LSE: When trying to instantiate the gddr_7:1 ip core, why do I get a Multiple Driver Error?

  Description: When IP is synthesized, Tool propagates a Warning and Error shown WARNING - Net direction has following drivers : instance Inst_bw_align ERROR - c:/lscc/gddrtest666/gddr_clarity/gddr71/gddr71.v(1284): net direction is constantly driven ...

• 6603 - Radiant: How to perform IP re-generation using ipgen?

  First, run "ipgen.exe -h" from the tcl console to view all the command options as shown below. usage: ipgen.exe [-h] [-o OUTPUT_DIR] [-proj_dir PROJ_DIR] -ip IP_MODULE_DIR [-cfg IP_CONFIG_FILE] [-skip_uniquify SKIP_UNIQUIFY_HDL] [-cfg_value ...