740 - Lattice ispLEVER: Timing Analysis: What is the I/O Timing Report?

• Related Articles

• 7761 - Why is the output of "des_set_operating_condition" is always -1C in TCL+?

  Below is a step-by-step explanation on why the default operating temperature in TCL+ defaults to -1C and observe its effect on timing analysis: 1. When you open the PAR-generated UDB file using des_read_udb and run des_report_operating_condition, the ...

• 6826 - Radiant: What type of clocks do the Clock Port column of the I/O Timing Analysis Report refer to?

  For I/O timing analysis, the "Clock Port" column/field could refer to the following depending on the destination clock: 1. Internal oscillator clock: If the destination clock is directly from the internal oscillator, or if the destination clock is ...

• 1150 - Diamond: What does the M or Minimum Speed grade mean in a Lattice I/O timing report?

  The M or Minimum Speed grade device appears to be faster than the fastest speed grade in the I/O timing report and the term "Minimum Speed grade" can be a bit confusing. For starters, it does NOT mean the slowest silicon device. The term refers to ...

• 7037 - All Nexus / Radiant 2023.1 or earlier: How are the clock-to-out max and clock-to-out min values on the I/O Timing Analysis report calculated?

  Clock-to-out max corresponds to the arrival time of the data of the external timing path when setup time is analyzed. Clock-to-out min corresponds to the arrival time of the data of the external timing path when hold time is analyzed. If there are ...

• 938 - Timing: What is the I/O Timing Report?

  Timing: The I/O Timing Report is a used to analyze the the IO timing in your design (Tsu, Th, Tco). The IO Timing Report sweeps across all the speed grades to determine the worst case.