7124 - Propel Builder / axi_crossbar or axi2axil: Where can the user download the IPs on the RISCV-RX template design (i.e.: axi_crossbar or axi2axil)?

The RX template design was created for customers to evaluate new RX core (with the help of some internal lite version IPs to build a valid SOC). However, these internal IPs are not available for download.

If users want to develop SOCs for their projects, users can use several releases of AXI IPs on the IP on Server instead of using the RX template.

• Related Articles

• 7758 - Propel Builder v2025.1: DRC update for AXI base address require to be multiple of its address range

  Description: A new DRC is implemented for AXI base address in Propel 2025.1 where base address of a component should be a multiple of its address range. The DRC related to AXI base address assignment was not present in Propel versions 2024.1 and ...

• 6898 - CertusPro-NX / Propel version 2022.1: Will there be an available GPIO IP with an AXI interface similar to what is observed on the CPNX FreeRTOS template design?

  The GPIO with AXI interface on the CPNX FreeRTOS Template design is created initially for the template to test the AXI4 interconnect but it is not part of the available IPs. When a FreeRTOS template for AVANT devices, the user can see that the ...

• 7214 - Avant-E: How to enable RISC-V software debug for Avant-E device

  Description: User is required to implement soft JTAG to enable RISC-V debug in Avant-E early silicon. Solution: Please follow below step to enable debug with Soft-JTAG. The pin assignment is based on Avant-E Evaluation Board. Create an Avant-E RISC-V ...

• 7100 - Propel Builder: Why is the Switch Verification and SOC Design icon greyed out and the Radiant/Diamond and Propel icons are missing?

  When the default folder structure of the project is followed, user will be able to see all of the icons on Propel Builder Tool bar from the Switch Verification and SoC Design to the Propel SDK button.

• 7712 - Propel Builder v2024.2: Why adding AXI4 component to a design increases the minimum address range of other AHBL/APB peripheral IP to 4K

  Description: In Propel Builder v2024.2, an enhancement was made to AXI components, setting a minimum address depth of 4KB. This change ensures that AXI4 transactions operate within a 4KB address boundary, promoting efficient data transfer and ...