7031 - UART Ip Core version 1.2 or earlier: Does the UART IP core in Lattice Propel Buldier support back-to-back transmission?

• Related Articles

• DisplayPort TX IP Version 2.1.0 does not support back-to-back video input without blanking interval

  Description DisplayPort TX IP version 2.1.0 requires the video input to provide blanking interval between active horizontal video lines to ensure correct video data packing. Failure symptoms include no video image output or black screen, even though ...

• 7115 - UART 16550 IP Core: What is the custom baud rate support range for UART 16550 Propel IP Core?

  Description: UART 16550 Propel IP Core supports custom baud rate in the range of 2400 to 1000000, which is stated in IP GUI custom baud rate parameter. There is a known documentation bug where custom baud rate supported was stated as 1 to 999999 ...

• 7032 - UART IP Core version 1.2 or earlier: How much deviation between the transmitter and receiver is allowed if it is 5% or 3%?

  We don't have specific or Hardware tested deviation allowed; if the user plans to use UART IP, let's achieve minimal to zero deviation to ensure a reliable UART transaction.

• 1723 - CPRI:  Can Lattice CPRI IP core (Common Public Radio Interface) support auto-negotiation?  

  Lattice CPRI IP core (Common Public Radio Interface) itself provides the auto-negotiation function. There is a state machine that will automatically go through a searching state from one line rate to the next line rate, eventually it will find the ...

• 1748 - Common Public Radio Interface - IP Core: Do I need to use a clock cleaner when using CPRI IP core (Common Public Radio Interface) with Lattice SERDES based FPGA?

  Lattice CPRI IP core (Common Public Radio Interface) supports LatticeECP2/M, LatticeECP3 and LatticeSC. When using the CPRI IP core in REC(Radio Equipment Control,master) mode, it's not necessary to use a clock cleaner since the system provides the ...