6953 - CertusPro-NX: Is it possible to implement JTAG Soft lock/unlock in CertusPro-NX?
There is an available sample design for this implementation but it is not publicly available due to security reasons. The customer should request the design by submitting a technical support ticket.
Related Articles
6697 - Mach-NX: How to request for Mach-NX User Guide for PFR OOB I2C Command Protocol, FPGA-UG-02136?
To obtain FPGA-UG-02136, Mach-NX User Guide for PFR OOB I2C Command Protocol, please follow below process to submit a Technical Support case. After logging in latticesemi.com website, go to http://www.latticesemi.com/Support to create a new Technical ...
6696 - Mach-NX: How to request for Mach-NX User Guide for Platform Firmware Resiliency Manifest and Log Management, FPGA-UG-02137?
To obtain FPGA-UG-02137, Mach-NX User Guide for Platform Firmware Resiliency Manifest and Log Management, please follow below process to submit a Technical Support case. After logging in latticesemi.com website, go to ...
6278 - Functional Safety: How to request for the Functional Safety (FuSa) User Manual that has access controlled by Lattice Semiconductor?
To request for the Safety Manual copies as listed below: Diamond 3.10 SP3 1. Diamond 3.10 SP3 User Manual for Industrial Functional Safety (IEC61508) 2. Diamond 3.10 SP3 User Manual for Road Vehicles (Automotive) Functional Safety (ISO26262) Diamond ...
6848 - How to request for Controlled Files that have access controlled by Lattice Semiconductor?
If you are looking for controlled documents, please ensure you have an active Non-Disclosure Agreement (NDA) with Lattice Semiconductor. To submit the NDA request, please go to this link to : http://www.latticesemi.com/nda Once the NDA is in place, ...
3571 - LatticeECP3: How to use Dphase(3:0)
Dphase_sel, Dphase_lock, Rxpll_lock,
Dphase_out,
Rclk_out ports available in 7:1 LVDS reference design on a customized board?
The following ports in Lattice LVDS 7:1 loopback demo are used for testing purpose to show the status of these signals to the user: - status_out_sel, - Status_RCLK_out, - seven_seg, - Status_out You can safely ignore the above 4 signals in your ...