6942 - Propel Builder: Is there an IP for a D Flip-Flop or for a serial-to-parallel register for Propel Builder? How can user add these circuits as part of the glue logic on a Propel Builder design?

To include a D Flip-Flop or any other circuit that is not part of the IPs but then can be a part of the glue logic, user can use the RTL option under IP catalog. User can input a valid RTL of the circuit they want to instantiate.

Related Articles
7230 - Lattice Propel: Why is my Propel Builder soft IP not available/missing in IP Catalog?
Description: Observing some soft IP version is not available to select in Propel Builder IP Catalog. Solution: This is an expected behavior. Lattice Propel Builder IP Server will only list out the specific compatible soft IP version. If you open an ...
6528 - Propel 2.2: IP configuration catalogue is blank when trying to generate or modify an IP.
Description: This is a bug in the initial release of Propel 2.2 production. The Propel 2.2 installation has some incorrect ‘World’ permissions on a specific sub-folder. This sub-folder is involved in the IP configuration – the incorrect permissions ...
7100 - Propel Builder: Why is the Switch Verification and SOC Design icon greyed out and the Radiant/Diamond and Propel icons are missing?
When the default folder structure of the project is followed, user will be able to see all of the icons on Propel Builder Tool bar from the Switch Verification and SoC Design to the Propel SDK button.
7712 - Propel Builder v2024.2: Why adding AXI4 component to a design increases the minimum address range of other AHBL/APB peripheral IP to 4K
Description: In Propel Builder v2024.2, an enhancement was made to AXI components, setting a minimum address depth of 4KB. This change ensures that AXI4 transactions operate within a 4KB address boundary, promoting efficient data transfer and ...
7133 - Propel Builder: Error (suppressible): xxx/lib/latticesemi.com/ip/cpu0/2.2.0/rtl/cpu0.sv(515): (vlog-2388) '<protected>' already declared in this scope (<protected>) at <protected>(<protected>).
Description: User may encounter cpu.v compilation error in Model Sim if directly run the Simulation Wizard from Radiant software for any RISC-V project. Solution: The correct method is to leverage the verification tool provided in Propel Builder to ...

6942 - Propel Builder: Is there an IP for a D Flip-Flop or for a&nbsp;serial-to-parallel register&nbsp;for Propel Builder? How can user add these circuits as part of the glue logic on a Propel Builder design?

6942 - Propel Builder: Is there an IP for a D Flip-Flop or for a&nbsp;serial-to-parallel register&nbsp;for Propel Builder? How can user add these circuits as part of the glue logic on a Propel Builder design?

Related Articles

7230 - Lattice Propel: Why is my Propel Builder soft IP not available/missing in IP Catalog?

6528 - Propel 2.2: IP configuration catalogue is blank when trying to generate or modify an IP.

7100 - Propel Builder: Why is the Switch Verification and SOC Design icon greyed out and the Radiant/Diamond and Propel icons are missing?

7712 - Propel Builder v2024.2: Why adding AXI4 component to a design increases the minimum address range of other AHBL/APB peripheral IP to 4K

7133 - Propel Builder: Error (suppressible): xxx/lib/latticesemi.com/ip/cpu0/2.2.0/rtl/cpu0.sv(515): (vlog-2388) '<protected>' already declared in this scope (<protected>) at <protected>(<protected>).

6942 - Propel Builder: Is there an IP for a D Flip-Flop or for a serial-to-parallel register for Propel Builder? How can user add these circuits as part of the glue logic on a Propel Builder design?

6942 - Propel Builder: Is there an IP for a D Flip-Flop or for a serial-to-parallel register for Propel Builder? How can user add these circuits as part of the glue logic on a Propel Builder design?