692 - Lattice Diamond:  Does the Lattice timing analysis tool only analyze 4096 timing paths at maximum?

The timing analysis tool does analyze all timing paths in your design.

For timing closure, the analyzer will address all failing timing paths even if they exceed 4096 paths.

It is for MAP and Place & Route TRACE reporting purpose only that up to 4096 worst timing paths are displayed.

Related Articles
939 - Lattice Diamond: How can I block clock transfers in the timing analysis tool? <br>
A clock domain transfer or crossing occurs when one register in a data path is clocked by CLKA and one register by CLKB. To block this transfer from the timing analysis use the preference: BLOCK INTERCLOCKDOMAIN If you are looking to relax or analyze ...
Lattice Diamond: How do i allow the tool to analyze the CDC from my design and view paths on Trace reports?
Users must add in a CLKSKEWDIFF constraint in order for the tool to analyze the different clock domains. Without this constraint, the tool will not report/analyze any CDC from the trace reports.
2128 - Diamond / Synplify Pro: Does the warning "@W:MT246 Blackbox EHXPLLJ is missing a user supplied timing model" have any negative effect on the timing analysis and optimization, or the Quality of Results?
Description: In Diamond and when using Synplify Pro as the synthesis tool, this warning "@W:MT246 Blackbox EHXPLLJ is missing a user supplied timing model" can occur when performing synthesis with an instantiation of any IP core using IPexpress. ...
1587 - Diamond: What are the different factors that affect device speed, temperature and voltage selection during software timing analysis?
Software uses different temperatures and voltages for timing analysis based on the following factors: Commercial vs. Industrial Part selection.: Commercial part selection enforces the following DEFAULT temperatures for Setup and Hold analysis (based ...
740 - Lattice ispLEVER: Timing Analysis: What is the I/O Timing Report?
Lattice ispLEVER: Timing Analysis: The I/O Timing Report (.ior) is a used to report the IO timing analysis of your design. Input Setup and Hold times (Tsu, Th) and Clock-to-Output times (Tco) are reported. The IO Timing Report sweeps across all the ...

692 - Lattice Diamond:&nbsp; Does the Lattice&nbsp;timing analysis tool only analyze 4096 timing paths at maximum?

692 - Lattice Diamond:&nbsp; Does the Lattice&nbsp;timing analysis tool only analyze 4096 timing paths at maximum?

Related Articles

939 - Lattice Diamond: How can I block clock transfers in the timing analysis tool? <br>

Lattice Diamond: How do i allow the tool to analyze the CDC from my design and view paths on Trace reports?

2128 - Diamond / Synplify Pro: Does the warning "@W:MT246 Blackbox EHXPLLJ is missing a user supplied timing model" have any&nbsp;negative effect on the timing analysis and optimization, or the Quality of Results?

1587 - Diamond: What are the different factors that affect device speed, temperature and voltage selection during software timing analysis?

740 - Lattice ispLEVER: Timing Analysis: What is the I/O Timing Report?

692 - Lattice Diamond: Does the Lattice timing analysis tool only analyze 4096 timing paths at maximum?

692 - Lattice Diamond: Does the Lattice timing analysis tool only analyze 4096 timing paths at maximum?

2128 - Diamond / Synplify Pro: Does the warning "@W:MT246 Blackbox EHXPLLJ is missing a user supplied timing model" have any negative effect on the timing analysis and optimization, or the Quality of Results?