6893 - How can I use CrossLink-NX evaluation board for UART communication?

• Related Articles

• 7748 - Why is there a mismatch between the hardware checklist and the evaluation board circuit design?

  Description: The customer has observed discrepancies between the design recommendations provided in the Hardware Checklist and the actual design implementation on the Lattice Evaluation Board. Reason: Hardware Checklists are developed after ...

• 7030 - Crosslink-NX: Do you have any connector board which can be connected to the J12 of VVML board?

  There's no available connector board for this.

• 6084 - CrossLink-NX: Do we have adaptor to connect for MIPI DPHY Connector on CL-NX-Evaluation Board?

  We do not have adaptor to connect J6 header. Also MIPI interface through J6 has not tested. However, by looking at the datasheet of the header pin, Wurth part number: 61302021121 (url: ...

• 5915 - CrossLink: Where can I find documentation about Master Link board Rev D?

  Please use documentation on CrossLink Rev C for your customers who are using Rev D. Generally, the change is just an improvement of the circuit layout on the board in order to remove the wire jumper that is present in Rev C and implement in Rev D. ...

• 7295 - Crosslink-NX: How to use other RLC package models in an IBIS model?

  To use other RLC package models in an IBIS model: 1. Open the IBIS file in a text editor. 2. Scroll down, and under the [Package] keyword, you will see the various package models available for use. 3. Using the commenting character "|", comment the ...