6830 - MachXO5D: How is USERCODE stored in MachXO5 JEDEC file?

• Related Articles

• JEDEC File USERCODE location: When editing USERCODE of the JED file at Program File Utility editor, the USERCODE data was updated on U field but not on the config data. When editing USERCODE of the JED file at Diamond Spreadsheet View, the USERCODE data was updated on both U field and config data.

  There are two different USERCODE for two different memory blocks. One for SRAM and one for FLASH. The SRAM USERCODE stored in the bitstream USERCODE frame and the FLASH USERCODE stored in the U field of the JEDEC file. Using the Diamond Spreadsheet ...

• 2504 - Can I use same JEDEC file or bit file to program different speed rating parts?

  Solution: Speed rating will define some characteristics of the parts, like how fast the part can run, and if it is commercial or industrial part. So if you want to use same JEDEC or bit file to program different speed rating part, your timing ...

• 7436 - MachXO2/MachXO3/MachXO3D: How to compare jedec file from read data from the internal flash?

  The data read from the the internal flash is page flipped when compared to jedec file. See below for example:

• 2578 - PAC Designer: When using the File->Import command in PAC-Designer, what information is imported from the JEDEC file?

  Solution:The JEDEC files generated by PAC-Designer contain two types of information: the analog feature configuration (example: VMON trip points) and the CPLD configuration. The analog feature configuration is imported to the .PAC project by the ...

• Power Manager: Are LA-ISPPAC-POWR1014-01TN48E and ISPPAC-POWR1014-01TN48I programmable in the same JEDEC file?

  Yes, you can use the same JEDEC file generated by ISPPAC-POWR1014-01TN48E to program to LA-ISPPAC-POWR1014-01TN48I or vice versa. The only difference for Automotive and Industrial grade devices is that they have different DEFAULT temperature ranges ...