6567 - Crosslink: What is the meaning of "aaa" characters in the Crosslink IBIS model?

• Related Articles

• 7295 - Crosslink-NX: How to use other RLC package models in an IBIS model?

  To use other RLC package models in an IBIS model: 1. Open the IBIS file in a text editor. 2. Scroll down, and under the [Package] keyword, you will see the various package models available for use. 3. Using the commenting character "|", comment the ...

• 6144 - ECP5: Does the ECP5 IBIS model support Keysight's ADS tool?

  Yes, the device supports Keysight's ADS for the ECP5 IBIS model.

• 121 - How can I view the output IO waveform with IBIS model?

  There are several ways to do that: 1. The typical usage of the IBIS file is to set up a simulation on an IBIS compatible simulator and have the IO output IBIS model drive a PCB trace with a receiver input attached at the end of the PCB trace, then ...

• 432 - How to get IBIS model for differential LVPECL IO when the generated model from ispLEVER is a single ended model?

  The low voltage positive emitter couple logic (LVPECL) interface uses two separate single ended buffers, plus on-board resistors to emulate a differential pair. The input output buffer information standard (IBIS) requires that the models be ...

• 1779 - LatticeECP3: Does Lattice provide IBIS model for SERDES inputs and outputs of LatticeECP3?

  Currently Lattice does not provide LatticeECP3 IBIS model for SERDES input and outputs such as HDINP/N and HDOUTP/N. Alternatively, we recommended you use the LatticeECP3 HSPICE IO Kit to reach their simulation goals. The Lattice HSPICE IO Kit is ...