6518 - Crosslink-NX: What is the Max Line Rate of Crosslink-NX Soft Dphy for each package for -7 Speed Grade?

• Related Articles

• 6516 - CrossLink-NX / MIPI CSI-2/ DSI D-PHY:What are the Max line Rate (Mbps) of Soft Dphy for Each Package for -9 Speed Grade?

  Definition:LIFCL17 72 WLCSP: N/A (No -9 Speed Grade) LIFCL17 72 QFN: 1250 Mbps LIFCL17 121 CSFBGA: 1500 Mbps LIFCL17 256 CABGA: 1500 Mbps LIFCL40 72 QFN: 1250 Mbps LIFCL40 121 CSFBGA: 1500 Mbps LIFCL40 256 CABGA: 1500 Mbps LIFCL40 289 CSBGA: 1500 ...

• 6517 - [Crosslink-NX & MIPI CSI2/DSI- DPHY]: What is the Max Line Rate of Crosslink-NX Soft Dphy for each package for -8 Speed Grade?

  Definition: LIFCL17 72 WLCSP: 1250 Mbps LIFCL17 72 QFN: 1000 Mbps LIFCL17 121 CSFBGA: 1200 Mbps LIFCL17 256 CABGA: 1200 Mbps LIFCL40 72 QFN: 1000 Mbps LIFCL40 121 CSFBGA: 1200 Mbps LIFCL40 256 CABGA: 1200 Mbps LIFCL40 289 CSBGA: 1200 Mbps LIFCL40 400 ...

• 6504 - Crosslink-NX: How can I achieve 2.5Gbps per line for D-Phy TX?

  Description: Crosslink-NX can supports 2.5Gbps per line, but when I started D-Phy TX version 1.70, the TX Line Rate per line is 160~1500 Mbps. Solution: In order for the 2.5 Gbps per lane to be supported, you need to change from Gear 8 to Gear 16. ...

• 6114 - Crosslink NX : Are there any Reference Designs of DPHY for different applications as stated below? 1. Connecting Soft DPHY Rx module output to Soft DPHY Tx module input. 2. Image acquisition from a camera through Hard DPHY.

  Solution: The following RDs available for Crosslink-NX will support the said applications: 1. FPGA-RD-02212 : N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation - Aggregate multiple Image Sensors into a single Output with Minimal Latency. - Uses ...

• 6067 - [CrossLink-NX] MIPI: Why does MIPI CSI-2/DSI DPHY Transmitter IP working on Radiant 2.0 but not on latest version?

  If Crosslink-NX device is an ES part, it is only supported by Lattice Radiant 2.0 SP1 Software.