6517 - [Crosslink-NX & MIPI CSI2/DSI- DPHY]: What is the Max Line Rate of Crosslink-NX Soft Dphy for each package for -8 Speed Grade?

• Related Articles

• 6516 - CrossLink-NX / MIPI CSI-2/ DSI D-PHY:What are the Max line Rate (Mbps) of Soft Dphy for Each Package for -9 Speed Grade?

  Definition:LIFCL17 72 WLCSP: N/A (No -9 Speed Grade) LIFCL17 72 QFN: 1250 Mbps LIFCL17 121 CSFBGA: 1500 Mbps LIFCL17 256 CABGA: 1500 Mbps LIFCL40 72 QFN: 1250 Mbps LIFCL40 121 CSFBGA: 1500 Mbps LIFCL40 256 CABGA: 1500 Mbps LIFCL40 289 CSBGA: 1500 ...

• 6518 - Crosslink-NX: What is the Max Line Rate of Crosslink-NX Soft Dphy for each package for -7 Speed Grade?

  Description: LIFCL17 72 WLCSP: N/A LIFCL17 72 QFN: 861 Mbps LIFCL17 121 CSFBGA: 1034 Mbps LIFCL17 256 CABGA: 1034 Mbps LIFCL40 72 QFN: 861 Mbps LIFCL40 121 CSFBGA: 1034 Mbps LIFCL40 256 CABGA: 1034 Mbps LIFCL40 289 CSBGA: 1034 Mbps LIFCL40 400 CABGA: ...

• 6067 - [CrossLink-NX] MIPI: Why does MIPI CSI-2/DSI DPHY Transmitter IP working on Radiant 2.0 but not on latest version?

  If Crosslink-NX device is an ES part, it is only supported by Lattice Radiant 2.0 SP1 Software.

• 6114 - Crosslink NX : Are there any Reference Designs of DPHY for different applications as stated below? 1. Connecting Soft DPHY Rx module output to Soft DPHY Tx module input. 2. Image acquisition from a camera through Hard DPHY.

  Solution: The following RDs available for Crosslink-NX will support the said applications: 1. FPGA-RD-02212 : N Input to 1 Output MIPI CSI-2 Side-by-Side Aggregation - Aggregate multiple Image Sensors into a single Output with Minimal Latency. - Uses ...

• 6798 - MIPI for CertusPro-NX/CrossLink-NX: What is the maximum CSI RX Bandwidth?

  Please refer to aggregated bandwidth: CertusPro-NX: (softIP: sysIOx3 banks ==> 1.5Gbps 4lane x 3 ports ==> 18Gbps) Crosslink-NX: (hardIP: 2 ports ==> 2.5Gbps 4lane x 2 ports ==> 20Gbps) + softIP ==> (total 38Gbps)