6463 - CrossLink: Does Crosslink supports full background programming?

• Related Articles

• 5248 - Crosslink: How to program the CrossLink through I2C with Lattice Diamond Programmer and Lattice HW-USBN-2B download cable or MCU-based I2C programming using I2CEMBEDDED?

  The CrossLink device is programmable using SPI or I2C. Thus, the programming is supported through: 1. SPI/I2C-based embedded programming (SSPIEMBEDDED or I2CEMBEDDED) using an Embedded MCU, or 2. SPI/I2C operations through Lattice Diamond Programmer ...

• 2681 - MachXO2: What happens to the internal oscillator during background flash programming?

  The internal oscillator of the MachXO2 remains active to the user logic during transparent configuration. The clock provided by the internal oscillator to the fabric will not stop or be influenced while the oscillator is also being used internally ...

• 4988 - What are the programming considerations for SSPIEM and I2CEM modification with Aardvark SPI/I2C APIs?

  Aardvark is a SPI/I2C adapter which can be used for programming of Lattice FPGA devices with Slave SPI or Slave I2C. Lattice Diamond provides SSPIEM and I2CEM example source codes which are modified with Aardvark SSPI and I2C API’s respectively. ...

• 6548 - Why does the change in the Feature Row appear to take effect immediately when using a background mode operation?

  The Feature Row programming will take effect immediately, whether it's Transparent Programming or Normal (offline) Programming. The idea behind it is that we want to make the content inside the shadow register always in sync with the actual flash ...

• 6597 - Crosslink-NX: What is the boot-up time for the Crosslink NX device?

  In datasheet, it is mentioned that "Instant-on configuration – IO configures under 3 ms". The boot-up time is based on estimation with respect to the following parts: power ramp time, config Post Power-up Test (self-test and trimming) time, bitstream ...