6109 - Power Calculator: How can I select other AirFlow Selection values (LFM) instead of the current values per heat selection?

• Related Articles

• 1461 - Diamond / Power Calculator: How do users include the heat sink information for power calculation in Lattice Diamond?

  To include the heat sink information in the power calculations, invoke the Power Calculator tool. Then click on the Thermal Profile button and select the Use Thermal Models radio button. If the user know the approximate Theta-JA, select the User ...

• 1456 - Power Calculator: How can the user load a Value Change Dump (VCD) file into Power Calculator?

  A Value Change Dump (VCD) file is an ASCII file that describes the state transitions of digital logic. A VCD file can be written by logic simulation tools. Power estimation performed using a VCD file is an improvement over guessing an operating ...

• 5266 - Diamond / Power Calculator: Which option should user select in "Board Selection" (JEDEC/Large/Medium/Small Board) category under Power Calculator - Thermal Profile section?

  Solution: User can select the option based on the details described below: JEDEC Board (2S2P) – Specifies that a board defined by JEDEC specifications be used. These specifications are based on real boards and measurements conducted in the lab used ...

• 462 - PAC-Designer / Power Manager II: What is the Vbpz Selection in the Trim Configuration Options?

  Solution: Vbpz stands for Voltage-bipolar-zero and represents the nominal DAC output voltage when the DAC is set to mid-scale (0x80). For most applications, this selection can be left to "Auto" and the "Calculate" button in the Trim Configuration ...

• 1458 - Diamond / Power Calculator: What is the default routing resource utilization value in estimation mode in the Power Calculator?<br>

  The routing resource utilization value predicts the amount of routing resource that your design will use. The three possible values are high, medium and low. The Power Calculator by default assumes that the routing resource utilization is medium. ...