6013 - CrossLink-NX: Why do I get this error in Radiant when programming LIFCL-40: "Verification Error... when Processing function: 'CHECK_ID'"?

• Related Articles

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 1305 - ispVM: "SVP Template Processor Error: Data Shift Verification Failed" or "Failed in Function DIRECT_FLASH_ERASE"

  If ispVM prompt error nessage like the following: "SVP Template Processor Error: Data Shift Verification Failed." "Failed in Function DIRECT_FLASH_ERASE " Please check the following debug step in sequential order: Scan the device by clicking on the ...

• Radiant 2023.1 and above: How to get an IP on the IP Server on a PC without an internet connection?

  In a PC with internet access, please install the latest Radiant version. By using the latest version of Radiant, user can download and save any IP on the IP Server locally then manually transfer it to the other machine without internet and install ...

• 1479 - Why am I getting the error message "Failed to verify ID" during Full Scan using DL3A/B/C cable?

  One will get the above error when the Device ID is not read back properly. The probable workarounds are, 1) Within the ispVM go to the pull down menu Project -> Project Settings, select Advanced and increase the TCK low pulse width to try slowing the ...

• Radiant 3.2: "Application calling GLX 1.3 function "glXCreatePbuffer" when GLX 1.3 is not supported! This is an application bug!"

  Description: When Radiant 3.2 is release, a new system lib is introduced by adding Qt libqxcb-glx-integration.so in <radiant install path>/lscc/radiant/3.2/bin/lin64. This will cause an error when launching Radiant on Linux: "Application calling GLX ...