5983 - Platform Manager 2: How many external DC-DC can be connected with GPIO output?

• Related Articles

• 5582 - Platform Manager: How to add a Real Time Clock (RTC) with a Fault Logger for ECP5 using Platform Manager 2?

  Description: This article describes adding Real Time Clock (RTC) with a Fault Logger for ECP5 using Platform Manager 2. Solution: The Full-Featured Fault Logger Configuration for ECP5 has several additional features for Timestamp. One of these is the ...

• 5974 - Platform Manager 2: How to manage the rising time of GPIO port of LPTM21L?

  For the rise ramp rate of GPIO standard, it can be found in the LPTM21L IBIS file. Inside the LPTM21 ibis file: [Ramp] variable typ min max dV/dt_r 1.94/2.88n 1.72/3.31n 2.14/2.38n dV/dt_f 1.97/190.62p 1.78/364.06p 2.15/108.23p R_load = 2.50k For ...

• 1827 - LatticeECP3: Does it allow for a multiple I/Os be connected in parallel to have higher combined output current exceeding that of a single I/O?

  LatticeECP3 FPGA 3.3V or 2.5V LVCMOS output pin can support maximum 20mA source or sink current per I/O. In order to support higher current I/O, a user can connect multiple adjacent I/O pins together to produce combined higher source or sink current. ...

• 5986 - Platform Manager II: Why is the RC filter value of LPTM21L EVB different from the recommended value of the Hardware checklist?

  Description: This FAQ explains the difference of RC filter value of LPTM21L EVB and the hardware checklist. Solution: Platform Manager II, LPTM21L operates as both an I2C transmitter (in CC mode) and receiver (in HE mode). While the I2C specification ...

• 2933 - Power Manager II: Why do I see a short (150ns or longer) logic zero glitch on my Power Manager open-drain output at the beginning of the sequence?

  Description: This is usually the result of setting the Reset level in the PINS window to Set Low / Don't Care; combined with the first step of the sequence setting the output High. If the output is set High in the second step of the sequence; then ...