5848 - Diamond: Is Diamond 2.1 and 3.10 compatible with Windows 10 (64-bit)?

• Related Articles

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 1031 - ispLEVER Classic / Installation: Does the tool can be installed in 64-bit Windows 7 or 64-bit Windows Vista?<br>

  Solution: No, it does not. The ispLEVER is not supported for 64-bit Windows 7 or 64-bit Windows Vista. This FAQ is intended to help facilitate running ispLever on one of these two operating systems. ispLEVER is fully supported in 32-bit Windows XP ...

• 5330 - Diamond Programmer: Does Diamond Programmer software have versions that support 32-bit Windows?

  You can find the 32-bit versions of Diamond Programmer in our software archives located at http://www.latticesemi.com/en/Support/SoftwareArchive.aspx

• 1030 - ispLEVER Classic / Installation: How to run ispLEVER tools on Windows 7 32-bit versions?

  Solution: ispLEVER is not supported to run on Windows 7 operating system. Based on our initial tests, we were able to run ispLEVER in the command line mode without any or minimal issues. ispLEVER is not fully compatible with Windows 7 when running in ...

• 894 - ispVM: Can ispVM be run on the Windows Vista 64-bit or Windows XP 64-bit O/S?

  No. There are currently no USB or parallel port 64-bit drivers available to run ispVM on either theWindows Vista 64-bit or Windows XP 64-bit O/S.