In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...
Description: Synthesis provides an error whenever it encounters a module from that does not exist within the design. In some case, this is encountered if a blackbox for an secured module is not present within the design location. Solution: If there ...
First, run "ipgen.exe -h" from the tcl console to view all the command options as shown below. usage: ipgen.exe [-h] [-o OUTPUT_DIR] [-proj_dir PROJ_DIR] -ip IP_MODULE_DIR [-cfg IP_CONFIG_FILE] [-skip_uniquify SKIP_UNIQUIFY_HDL] [-cfg_value ...
Description: When installing Diamond on a Windows machine, the error below might occur: "Data Transfer Error Information" Solution: Please refer to any of the below solutions to resolve the issue: 1. The issue seems to be from a corrupted installer. ...
Description: This is typically happens if a design that uses mixed language (Verilog/SystemVerilog + VHDL) has mismatch port widths. Solution: To avoid this error, make sure that both Verilog/SystemVerilog and VHDL modules has the same port widths ...