5285 - iCECube2: How to generate programming files (*.bin or *.hex) without the header?

• Related Articles

• 295 - Lattice Diamond: How do I generate a LatticeXP and LatticeXP2 device bit files for EPROM programming?

  Unlike the SRAM based FPGA families like LatticeECPx and LatticeSC, the programming bitstream file for the Flash based LatticeXP and LatticeXP2 are JEDEC file format. When using ispVM to program the on-chip Flash through the JTAG interface, the JEDEC ...

• 4084 - Diamond Deployment Tool: Does the Lattice Diamond Deployment tool support JEDEC to .bin conversion like the utility JED2HEX.exe ?

  The Lattice Diamond Deployment tool does not support the .bin generation. The Diamond Deployment tool has the feature to convert JED to the Binary bitstream, ASCII Bitstream, intel hex, Motorola hex and other format files. The JED2HEX.exe utility was ...

• 3570 - ICEcube2: How to program the iCE40 FPGA(CRAM) via Slave SPI interface from a on board MCU with the hex file?

  Generate the hex file from iCEcube2 tool ,create the array from hex file and send the array data byte wise similarly as sending bin file as per Slave SPI Configuration Interface procedure is described in TN1248.

• 1988 - Lattice Diamond / Deployment Tool: How to generate the SED/SEA files with a batch or script using Deployment Tool

  The Deployment Tool allows generation of SEA and SED files form the command line using the following commands: cd <diamond_installtion_path>/bin/nt64 ddtcmd -oft -sspi -if <xcf file> -ofa <path for .sea> -ofd <path for .sed> For more information ...

• 6132 - Radiant: How can I generate IBS (IBIS) and PKG (package) files?

  Description: In export files flow, IBIS model and package files can be created as per device-specific directly from the tool. Solution: To generate IBIS and PKG files, do the following: Open any Radiant Project using Lattice Radiant 3.0 or latest ...