521 - POWR1014A-01/POWR1014A-02: What is the difference between POWR1014A-01 and POWR1014A-02?

• Related Articles

• 625 - Diamond / Licensing: Why do I get a license error when I open the tool through Windows Remote Desktop?

  Description: The Diamond software will validate the node-locked license by checking the NIC address of the PC where the software is running. If the NIC address does not match the address in the node-locked license file, the software lauch will fail. ...

• 3612 - LatticeECP3: Is Lattice ECP3 device PCISIG (Peripheral Component Interconnect Special Interest Group) compliant in terms of Differential peak-to-peak input voltage (VRX-DIFF_P-P)?

  Our Lattice ECP3 device is PCISIG compliant and passed PCISIG compliance tests at PCISIG workshop. The PCI Express Electrical and Timing Characteristics of our ECP3 datasheet says that the minimum value for Differential peak-to-peak input voltage ...

• 800 - Power Manager II: What is the maximum junction temperature Tj for the POWR1220AT8 device?

  The absolute maximum junction temperature of the PAC-POWR1208P1 is at 130°C. Operation at or above this temperature will permanently degrade performance or permanently damage the device. In addition, operation outside of the recommended operation ...

• 801 - Power Manager II: What is the Peak Reflow Temperature for the ProcessorPM or POWR605?

  Please refer to FPGA-TN-02041 - Solder Reflow Guide for Surface Mount Devices for more details. The ProcessorPM and POWR605 are the same device with QFNS 24 package type. User may refer to Table 8.2. Peak Reflow Temperature (TP) by Package Type and ...

• 2547 - ispPAC-POWR1014/A: Where can I find information about the package thermal resistance of the ispPAC-POWR1014/A device?

  Solution:The Lattice Thermal Management document provides these details and can be found here: Thermal Management Pg. 3 gives the package data for the TQFP 48, 1.4mm thick (applicable package for the POWR1014/A) for Package Thermal Resistance ...