4018 - Diamond: How to import IPexpress blocks into Clarity Designer while porting a <i>LatticeECP3</i> design to an <i>ECP5</i> device?

• Related Articles

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 3898 - Diamond / IPExpress: Why is IPexpress disabled for ECP5?

  Solution: LatticeECP5 is supported by Clarity Designer, a new tool within the Lattice Diamond software environment that addresses the need to be able to generate and plan multiple design blocks within a customer's design. Clarity Designer is used for ...

• Lattice Diamond: Does Lattice recommend porting/converting of IP from different device with different IP version?

  Lattice does not recommend users to do porting/conversion of IP from/to different device in different IP versions. Example: FFT Compiler v2.8 does not support ECP5 device. FFT Compiler v2.9 supports ECP5 device. If user used FFT Compiler v2.8 and ...

• Diamond: Why does the Clarity Designer or IPExpress not contains any Module IP?

  Description: All IPs have software requirements stated in the IP User Guide. After downloading the IPs, sometimes it will not be reflected in the Clarity Designer or IP Express. Solution: The suggestion is to delete/uninstall older versions of ...

• Diamond 3.12 and below: Why does the IP server for IPExpress and Clarity Designer does not work on Diamond?

  Description: As a part of Lattice’s on-going efforts for best-in-class security, Lattice has upgraded the IP and webserver URLs referenced by the Diamond software. The impact to customers using Diamond is that: 1. They will not receive Diamond ...