4015 - Diamond Programmer: Does the Diamond Programmer allow parallel programming on custom address ports?

• Related Articles

• 7087 - Radiant Programmer: Does this support remote programming capability?

  Radiant Programmer itself does not have the capability of doing remote programming, it will need a third-party connection to allow remote programming. User can use their server as long as they have the 3rd party hardware component (hub) and software ...

• 5762 - Radiant/Diamond Programmer: Why did some added Custom Flash devices in programmer do not work?

  Solution: There are virtually hundreds if not thousands of SPI Flash part numbers available from several vendors that may have varying SPI flash commands required for access. What is guaranteed to be working are the ones found on our list. However, ...

• 6143 - Lattice Diamond Programmer: Do JTAG Full VME embedded source files are supporting JTAG Daisy Chain Programming?

  The answer is yes, JTAG Full VME embedded source files are supporting the JTAG Daisy Chain Programming. The chain of devices setup should be done in the Lattice Diamond Programmer file (.xcf) by adding target device/s.

• 5902 - Lattice Diamond Programmer: Are there any differences in Flash programming algorithm of MT25QL512 if we change the package type in Diamond Programmer?

  The quick answer is that there are no differences. Assuming you have Diamond 3.11 installed, you may check this default location "C:\lscc\diamond\3.11_x64\data\vmdata\database\flash". This is where the actual flash algorithms used by the programmer ...

• 7054 - Diamond 3.12 SP1 and below Programmer: ERROR: boolUSBISPReadPacket()

  Description: When programming a device for the second time via terminal or scripting using HW-USBN-2A in Linux, below error will occur: ERROR: boolUSBISPReadPacket() Solution: This is a known issue on Diamond 3.12 SP1 or lower versions. As a ...