3905 - Distributed DPRAM IP v3.6:What is the use of the following attribute in IPExpress generated DPRAM HDL file? attribute NGD_DRC_MASK of Structure : architecture is 1.

• Related Articles

• 5568 - Diamond/MachXO3: How to use the Lattice primitives in this device family?

  DescriptionL Please check the FPGA Libraries Reference Guide. Open Diamond Software -> Start Page -> Look for the "Reference Guides" -> Diamond [DIAMOND VERSION] FPGA Libraries (PDF version) Actual Libraries can be found in the following directories ...

• 3405 - MachXO2 / IPExpress / PLL : While configuring the PLL in frequency mode, does the IPexpress tool use the fractional-N value?

  Solution: The fractional-N value in Ipexpress is supported only in divider mode to generate a fractional output frequency but not in frequency mode.

• 2519 - LatticeECP3 : Why does LatticeECP3 Generic DDR (Double Data Rate) design generates missing attribute errors?

  IDDRAPPS and ODDRAPPS attributes are required for all DDR interfaces to indicate the type of interface being generated by the software. When the DDR interface is generated through IPexpress it will generate HDL that includes the correct values for ...

• 7571 - Diamond FIR IP: ERROR - logical block <> with type <> is unexpanded.

  Description: When the user generates the FIR IP in Diamond, an error may occur during translate design. Solution: There is currently no fix for this. However, please see the following steps for a workaround: 1. Go to ...

• 871 - Lattice Diamond: EBR: Why are the number of EBR blocks used more than I calculate for a True DPRAM?

  Lattice Diamond: EBR: The difference between what you calculate for the number of EBR blocks required and what is eventually used to construct the memory is caused by the implemented hardware architecture having excess memory space available for use. ...