3859 - MachXO2: What is the part number of the socket used for QFN32 (for MachXO2 device) Socket Adapter PN-S32-LCMXO2 ?

• Related Articles

• 6305 - MachXO: Where to find the automotive BSDL files?

  The automotive BSDL files for MachXO should be the same functionality as the standard device files on the website.

• 730 - MachXO: Why do external pull up required for MachXO SLEEPN pin?

  The SLEEPN pin on the MachXO device is a control signal for the internal regulator. If the pin is pulled low it puts the device into a low power state. Although the SLEEPN pin has a weak internal pull-up, an external pull-up is recommended if the pin ...

• 2009 - MachXO:Which IBIS models should I use for the MachXO JTAG signal pins?

  Solution: For the JTAG input pins, use the LVCMOS input models, input threshold voltage is referenced using the VCCAUX value, and select the model that has: TCK: bus keeper = NONE TDI: bus keeper = pull up TMS: bus keeper = pull up For the JTAG ...

• 2652 - What are DELPHI Compact Thermal Models, how can these be used and what is their scope?

  The DELPHI methodology was defined by the DELPHI Research Consortium, partially funded by European Community. DELPHI Compact Thermal Model (CTM) is a thermal resistance network which is comprised of a limited number of nodes connected to each other ...

• 178 - The voltage ranges in the IBIS model files typically extend beyond the limits specified in the device datasheets. Can these voltages be applied to the device?

  No. The datasheet limits must never be exceeded. The IBIS standard generally specifies the range used for data points to be from -Vcc to 2*Vcc. This range is used to model the I/O behavior in more detail, and is independent of the actual device ...