3837 - Lattice Diamond: Is the USE EDGE preference available in the tool for MachXO2 devices?
Solution:
The USE EDGE preference is not available for MachXO2 devices in Lattice Diamond software. The only way to support the edge is through the design - ECLKSYNC and DDR modules only.
Related Articles
1255 - Lattice Diamond: How to locate DCS in preference file for FPGA?
Lattice Diamond: DCS is a Digital clock select, a clock multiplexer, which is available in devices such as LatticeSC/M, LatticeXP2, LatticeECP2/M and LatticeECP3. How to assign DCS locations in .lpf preference file? The syntax is shown in the ...
4084 - Diamond Deployment Tool: Does the Lattice Diamond Deployment tool support JEDEC to .bin conversion like the utility JED2HEX.exe ?
The Lattice Diamond Deployment tool does not support the .bin generation. The Diamond Deployment tool has the feature to convert JED to the Binary bitstream, ASCII Bitstream, intel hex, Motorola hex and other format files. The JED2HEX.exe utility was ...
7733 - ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?
In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...
3035 - Lattice Diamond Programmer: How can I use a SPI Flash Memory although it's not included in the supported list of Serial Peripheral Interface (SPI) Flash devices in the Lattice Diamond programmer?
Follow the below steps to add custom SPI flash in the Diamond Programmer: -Open the Lattice Diamond Programmer. -Go to Edit-->Custom devices. -Click "Add" to customize your actual device according to the datasheet of the flash. For more information ...
3795 - Diamond Deployment Tool: Does the PCF(Pattern Control Format) format supported in the Lattice Diamond Deployment Tool?
The Lattice Deployment Tool already support's PCF format. To generate the PCF file, invoke Lattice Diamond Deployment Tool, Select Tester function type and ATE Output File Format. Both the Agilent HP3070 and HP3065 Tester Types are supported for PCF ...