3772 - Diamond / Spreadsheet View: How are&nbsp;the allowance and the percentage related in the Lattice Diamond tool's SSO (Simultaneous Switching Outputs) Analysis report? How to interpret the percentage with reference to allowance?<br>

• Related Articles

• 1800 - Diamond / Spreadsheet View: How does the user determine Simultaneous Switching Noise (SSN) from within Lattice Diamond tools?

  An estimate of SSN can be determined by running the Simultaneous Switching Output (SSO) Analysis tool in the Lattice Diamond Spreadsheet View. Information about SSO Analysis can be found in the Lattice Diamond online help by searching for SSO ...

• Radiant and Diamond: HDL pin constraints not seen in Spreadsheet View/Device Constraint Editor

  Description: In Lattice Radiant and Diamond, while using the Spreadsheet View/Device Constraint Editor, it is possible to not see the HDL pin constraints reflected in GUI. Solution: This may be because the pins mentioned in the lines of code have ...

• 692 - Lattice Diamond:&nbsp; Does the Lattice&nbsp;timing analysis tool only analyze 4096 timing paths at maximum?

  The timing analysis tool does analyze all timing paths in your design. For timing closure, the analyzer will address all failing timing paths even if they exceed 4096 paths. It is for MAP and Place & Route TRACE reporting purpose only that up to 4096 ...

• ECP5 / Diamond 3.14: Why does my design get a Map device oversize error related to PLL for LFE5U-12F in with Diamond 3.14, but completes map successfully in earlier releases of Diamond software?

  In Diamond version 3.14, there is a bug where it incorrectly limits the number of PLLs in the device to 0 for LFE5U-12F. Example error message: ERROR - (device oversize error). The number of PLL components needed (1) exceeds the number available. ...

• 740 - Lattice ispLEVER: Timing Analysis: What is the I/O Timing Report?

  Lattice ispLEVER: Timing Analysis: The I/O Timing Report (.ior) is a used to report the IO timing analysis of your design. Input Setup and Hold times (Tsu, Th) and Clock-to-Output times (Tco) are reported. The IO Timing Report sweeps across all the ...