3624 - LatticeECP3: What are the supported rates for Mobile Industry Processor Interface (MIPI) Camera Serial Interface (CSI) on Lattice ECP3?

• Related Articles

• 6472 - Crosslink: Can I use FPGA chips of the CrossLink series to organize a bridge MIPI DSI to MIPI CSI-2?

  For your application needs, there is a Reference Design that you can try which is 1 to N MIPI CSI-2/DSI Duplicator. Please refer to the webpage and documentation is also provided: ...

• 3505 - iCE40:Does MIPI CSI2 and DSI reference designs supported on iCE40?

  MIPI CSI2 and DSI interfaces are not supported on iCE40.

• 6140 - Crosslink: Is there any CSI-2 test pattern generator?

  In Crosslink IP, Lattice do not have color bar pattern generator except for cmos-to-dphy IP but you may try to check MIPI CSI-2 Transmit Bridge Reference Design for other Lattice FPGA devices. Here's the link: ...

• 5923 - MIPI D-PHY to CMOS Interface Bridge Soft IP: Can the DSI to CMOS IP be changed to DPHY1 from DPHY0?

  The user can change the hardened D-PHY blocks location between DPHY0 and DPHY1 by adding a LOCATE preference in the .lpf file to SITE "MIPIDPHY0" or SITE "MIPIDPHY1". The LOCATE preference is the following, for example: LOCATE COMP " ...

• 6067 - [CrossLink-NX] MIPI: Why does MIPI CSI-2/DSI DPHY Transmitter IP working on Radiant 2.0 but not on latest version?

  If Crosslink-NX device is an ES part, it is only supported by Lattice Radiant 2.0 SP1 Software.