3408 - Where can I find the complete details for the Model 300 programmer?

• Related Articles

• 1977 - Do I need to purchase "28-pin converter" to program a Lattice Device with my Model 300 Programmer?

  Lattice provides a wide array of adapters for programming Lattice products via a desktop programmer from Lattice or 3rd party vendor. A 28-pin converter (Lattice Part Number "pDS4102N-28P2SAB") is required for use with Lattice socket adapters only if ...

• 2264 - Model 300 Programmer: What is the procedure to program a generic JTAG device using SVF Files and Model 300 Programmer?

  The Model 300 Programmer can program any generic JTAG device, provided user have the correct SVF file for it. User can program any JTAG device that has a SVF file by selecting the correct adapter footprint and voltage in the Model 300 Programmer main ...

• 7041 - Diamond 3.9 and All MachXO: Why here is no simulation model for SEDFA/SEDFB Primitive with its support devices?

  Description: After installing Diamond, I find under "xxxx\cae_library\simulation", there not have a simulation model for XO3L SEDFA/SEDFB Primitive. Look into this, I find XO2 device also not have a simulation model for SEDFA/SEDFB Primitive. ...

• Why FPGA Programming Failure When JTAG Chain Has 7 or More Devices?

  DESCRIPTION When programming Lattice FPGA devices via SPI Flash using a JTAG chain, the Erase-Program-Verify (EPV) operation fails deterministically starting from the 7th device in the chain. Chains of 6 devices or fewer complete SPI Flash EPV ...

• 5248 - Crosslink: How to program the CrossLink through I2C with Lattice Diamond Programmer and Lattice HW-USBN-2B download cable or MCU-based I2C programming using I2CEMBEDDED?

  The CrossLink device is programmable using SPI or I2C. Thus, the programming is supported through: 1. SPI/I2C-based embedded programming (SSPIEMBEDDED or I2CEMBEDDED) using an Embedded MCU, or 2. SPI/I2C operations through Lattice Diamond Programmer ...