333 - ispVM System: How can I generate application (design) specific BSDL file with ispVM?

• Related Articles

• Radiant 2023.2 and below: How to create a design-specific BSDL for Nexus devices?

  You can create an application-specific BSDL file using Radiant Deployment Tool. However, the tool only supports specific BSDL files that target non-volatile memory (using *.jed file), which is inapplicable for Nexus devices that target SRAM (*.bit).

• 7458 - ispVM System 18.1 - How to generate an SVF File?

  To generate an SVF file for programming, please see below steps: 1. Open ispVM system 2. Add the device/s that you want to program by clicking the "add device" icon and configure the operation you want to use for your device.

• 606 - Lattice ispVM: What could cause the “JTAG-NOP” error message in ispVM System tool?

  Description: "JTAP-NOP" indicates that a device was detected, but its JTAG IDCODE is not in the ispVM System database. There are a few reasons this may occur. Solution: The device is a newer Lattice device and is not yet supported by the version of ...

• 3118 - Lattice Deployment Tool: When we generate a BSDL file using Deployment Tool or ispVM, why are some pins changed from inputs and outputs to bi-directional signals ?<br>

  In the dialog box of Deployment Tool, please check Convert Bi-directional I/O's to Input and Output, or in the dialog box of BSDL Generator in ispVM, please check Convert Bidirectional Signals to Input and Outptus and click on Generate, then the ...

• 188 - Lattice ispVM system: What is the maximum number of devices ispVM programming chain supports?

  There is no specific limit for ispVM System software. In theory, you can add devices until you run out of computer memory. However, additional consideration must be taken in to account during board design, such as buffering and proper termination. ...