3035 - Lattice Diamond Programmer: How can I use a SPI Flash Memory although it's not included in the supported list of Serial Peripheral Interface (SPI) Flash devices in the Lattice Diamond programmer?

• Related Articles

• 6141 - Programmer: Does Lattice have a list of external SPI flash Options or vendors?

  To see complete list of the External SPI flash available go t our Lattice Radiant and Diamond Programmer or Help options For Diamond programmer, set the Access mode to SPI flash programming and look for the SPI Options. For Radiant programmer, see ...

• 2404 - Lattice Diamond Programmer isn't listing a new SPI Flash device I would like to use, is there a work around?

  Even though Lattice Diamond Programmer doesn't appear to list the new SPI Flash device, it may still be found in the SPI FLASH OPTIONS category, under the FAMILY selection of SPI SERIAL FLASH BETA. If the user still does not see the new SPI Flash ...

• Lattice Diamond Programmer: Are there any differences in Flash programming algorithm of MT25QL512 if we change the package type in Diamond Programmer?

  The quick answer is that there are no differences. Assuming you have Diamond 3.11 installed, you may check this default location "C:\lscc\diamond\3.11_x64\data\vmdata\database\flash". This is where the actual flash algorithms used by the programmer ...

• 5762 - Radiant/Diamond Programmer: Why did some added Custom Flash devices in programmer do not work?

  Solution: There are virtually hundreds if not thousands of SPI Flash part numbers available from several vendors that may have varying SPI flash commands required for access. What is guaranteed to be working are the ones found on our list. However, ...

• 641 - Lattice ispVM: How to create a single bit file to program two FPGA's from one SPI Flash?

  As shown in Figure 15-2 of TN1108 (LatticeECP2/M sysCONFIG Usage Guide), users can configure two Lattice FPGA's from one SPI flash. The first device is programmed in SPI mode, whereas the second device is programmed in Slave Serial mode. To use this ...