2775 - Diamond: How can I add a net that directly connects with an input signal and an output signal in Diamond Schematic Editor ?<br>

• Related Articles

• 1751 - Schematic Design Entry: How do I add I/O type to a port?

  To add an I/O type to a port in the design schematic, users need to first draw (or extend) a wire from the symbol port of their choice. Next, name this wire using the Net Name button. Click the IO Port button and select the type of port (input, ...

• 2354 - All FPGA: How do I add delay to a net in my design?

  Description: To add or control a net's delay manually is useful in some cases to improve hold time or adjust the skew between two nets. In order to add delay to a net, one or more buffers need to be added to the net. You will also need to add ...

• 1774 - Diamond: How can the user set the DELAYB cell to add delay to an input port when a single register exists between the input and output ports?

  When only one register is present between the primary input and the primary output ports, that register is automatically placed in the output PIO cell . This prevents the DELAYB cell from being used in the input PIO cell even when user add the DELAYB ...

• 2802 - Diamond / ispLEVER Classic Schematic Editor: How can signals be prevented from being optimized away or pruned?

  Lattice Diamond design software and ispLEVER Classic design tools extend their HDL attributes option in Schematic Editor. To preserve a signal, click on the signal and right-click on it. The object properties window will open up. Select your desired ...

• 3845 - Diamond: How to create a VHDL output from a schematic file?

  You can get a VHDL output from a schematic file by following these steps: 1. In project properties, change the Schematic HDL Type to VHDL. 2. Make any small changes in the schematic file and save it. 3. In the Hierarchy, get the VHDL source code for ...