2721 - Can Power Manager II Device  support Hot Socketing?

• Related Articles

• 1399 - Power Manager II: How does the POWR1220AT8 control a 12V hot swap MOSFET when the maximum HVOUT voltage is 12V?

  First of all, only the dash-two (POWR1220AT8-2) Power Manager devices support HVOUT output voltage of 12V. Secondly, the gate of the hot swap MOSFET does need to be driven to 18V to 20V in order to turn it on. This is accomplished using a few ...

• 1476 - Power Manager II: Can I use an ispPAC-POWR1220 for -48V hot-swap control?

  Although most of our applications literature shows the ispPAC-POWR607 in -48V hot-swap applications, it is possible to also use an ispPAC-POWR1220. It is generally not preferable to the ispPAC-POWR607 for the following reasons: It is physically ...

• 413 - How do I implement Power-Off Detection in a Power Manager II device ?

  The Power Off Detection is used to sense when a supply (or set of supplies) is fully discharged before re-cycling the power-on or re-start sequence. Many devices require the supplies to be fully off before applying power and a Power Off Detection ...

• 6398 - CertusPro-NX: Does High Performance IO supports hot socketing?

  The Certus-Pro NX HP IOs does not support hot socketing.

• 1495 - Power Manager II: Is there an "Boundary Scan Descriptive Language"&nbsp; (BSDL) file available?&nbsp;<br> &nbsp;

  Yes, the Lattice website has a page dedicated to Power Manager Devices , Power Manager II"Boundary Scan Descriptive Language", BSDL files are available under "DOWNLOADS" section of the page.